How to install Recessed Lights using LED Retrofit Kit

Our kitchen has recessed lighting.  However, a couple of bulbs are out.  It is a good time to upgrade it to LED.  Originally was  incandescent bulbs, we've changed them to compact fluorescent, now, we are going to change them to LED.  An easy solution is to replace them using the FEIT Electric Recessed Lights Retrofit Kit.  These are sold at Amazon, also at Home Depot.  

We've chosen these lights because...

1.  LED - last a long time, energy saving
2.  Easy to install.
3.  Dimmable lights
4.  All one piece, water resistant
5.  Seal tightly against the ceiling, so, help keep cool air out, and keep dirt out.

Step 1.  Turn off the power at the circuit breaker.

Step 2.  Remove the old light bulb.  

Step 3.  Take off ring by unclipping the springs from the sides.

Step 4.  Measure the height of the ring housing to at least 4.5 inches.  If not enough height, adjust by pushing the top plate upward.

Step 5.  Screw in the adapter to where the light bulb goes.

Step 6.  Connect the light to the adapter.

Step 7.  Mount the light to the rings on both sides.

Step 8.  Turn Light back on!

Take a look at the video and we look forward to your feedback!

---